NSN 5306-01-312-4950
Coaxial Connector
Between 1.408 inches and 1.438 inches fastener length, dished hexagon head style, between 0.235 inches and 0.250 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS1958C11 for national stock number 5306013124950.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-312-4950.
-
MPN or Model
NAS1958C11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.710 inches and 0.760 inches -
Fastener Length
Between 1.408 inches and 1.438 inches -
Head Style
Dished hexagon -
Head Height
Between 0.235 inches and 0.250 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1958 professional/industrial association standard
More from these suppliers
- 1680-00-939-9126 MPN NAS25Trunnion Tank Strap
- 5945-01-438-6249 MPN M83536/13-008LElectromagnetic Relay
- 1680-01-501-4656 MPN NAS43DD8-62FCAircr Sleeve Spacer
- 5935-00-153-4395 MPN NAS1642R16-24SNElectrical Receptacle Connector
- 5305-00-007-1563 MPN NAS1100E06-6PMachine Screw
- 5305-00-008-5845 MPN NAS1632CE7Machine Screw
- 5305-00-008-5905 MPN NAS1189C02T5LSocket Head Cap Screw
- 5305-00-059-8280 MPN MS35214-55Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-312-4950 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1958C11 | National Aerospace Standards |
Stock Check
- NE: 903