NSN 5306-01-312-7532
Wheel Bolt
3.125 inches fastener length, double hexagon w/hole head style, 0.260 inches head height, width between flats: 0.250 inches .
Manufacturer part number MS9565-37 for national stock number 5306013127532.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-312-7532.
-
MPN or Model
MS9565-37
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.630 inches and 0.690 inches -
Fastener Length
3.125 inches -
Head Style
Double hexagon w/hole -
Head Height
0.260 inches -
Width Between Flats
0.250 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
0.040 inches -
Hole Diameter
0.047 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 2.060 inches and 2.120 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Hole Configuration Style
Double hexagon longitudinal hole -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5950-00-035-4425 MPN MS75085-07Radio Frequency Coil
- 5905-00-113-4853 MPN MS35043-162Composition Fixed Resistor
- 5940-00-151-9253 MPN MS35446-22Lug Terminal
- 5940-00-204-9142 MPN MS25036-12Lug Terminal
- 5935-00-250-7398 MPN MS3106A24-10PElectrical Plug Connector
- 5935-00-251-1246 MPN MS3106F24-6PWElectrical Plug Connector
- 5935-00-306-0326 MPN MS3121E18-32PWElectrical Plug Connector
- 5935-00-355-4919 MPN MS102A18-10SYElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-312-7532 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9565-37 | Military Standards |