NSN 5306-01-313-1755
Coaxial Connector
Between 1.393 inches and 1.423 inches fastener length, spline extended washer head style, between 0.240 inches and 0.260 inches head height, extended washer diameter: between 0.460 inches and 0.470 inches .
Manufacturer part number MS21134-04015 for national stock number 5306013131755.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-313-1755.
-
MPN or Model
MS21134-04015
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.445 inches and 0.495 inches -
Fastener Length
Between 1.393 inches and 1.423 inches -
Head Style
Spline extended washer -
Head Height
Between 0.240 inches and 0.260 inches -
Extended Washer Diameter
Between 0.460 inches and 0.470 inches -
Extended Washer Thickness
Between 0.026 inches and 0.046 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Head Minor Diameter
Between 0.235 inches and 0.250 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-416 type 2 cl3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-159-0252 MPN 706S3Stud Terminal
- 5940-01-384-3975 MPN NAS1063B3-3Terminal Board Marker Strip
- 5305-00-052-4046 MPN NAS1081-6D12Setscrew
- 5305-00-054-9328 MPN MS24694C342Machine Screw
- 5305-00-127-0191 MPN MS27039DD0828Machine Screw
- 5305-00-205-3671 MPN NAS1635-02LE10Socket Head Cap Screw
- 5305-00-225-9443 MPN MS16996-32Socket Head Cap Screw
- 5305-00-269-2799 MPN MS90726-56Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-313-1755 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21134-04015 | National Aerospace Standards |
MS21134-04015 | Military Standards |