NSN 5306-01-313-9056
Coaxial Connector
Between 7.063 inches and 7.093 inches fastener length, spline extended washer head style, between 0.590 inches and 0.610 inches head height, extended washer diameter: between 1.384 inches and 1.394 inches .
Manufacturer part number MS21134-12096 for national stock number 5306013139056.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-313-9056.
-
MPN or Model
MS21134-12096
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.053 inches and 1.103 inches -
Fastener Length
Between 7.063 inches and 7.093 inches -
Head Style
Spline extended washer -
Head Height
Between 0.590 inches and 0.610 inches -
Extended Washer Diameter
Between 1.384 inches and 1.394 inches -
Extended Washer Thickness
Between 0.098 inches and 0.118 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Head Minor Diameter
Between 0.797 inches and 0.812 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 5.990 inches and 6.010 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-413-3005 MPN NAS1063B1-7Terminal Board Marker Strip
- 1680-01-478-1737 MPN NAS43DD0-38FCAircr Sleeve Spacer
- 1680-01-571-7708 MPN 10367-A-1032-17Controller Handle
- 1560-01-652-3629 MPN NAS1834-3-750Aircraft Structural Panel
- 5305-00-068-0543 MPN MS24678-11CSocket Head Cap Screw
- 5305-00-071-2233 MPN MS90725-18Hexagon Head Cap Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-150-9518 MPN MILS7839Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-313-9056 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21134-12096 | National Aerospace Standards |
MS21134-12096 | Military Standards |