NSN 5306-01-313-9202
Coaxial Connector
Between 2.938 inches and 2.968 inches fastener length, spline extended washer head style, between 0.590 inches and 0.610 inches head height, extended washer diameter: between 1.384 inches and 1.394 inches .
Manufacturer part number MS21134-12030 for national stock number 5306013139202.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-313-9202.
-
MPN or Model
MS21134-12030
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.053 inches and 1.103 inches -
Fastener Length
Between 2.938 inches and 2.968 inches -
Head Style
Spline extended washer -
Head Height
Between 0.590 inches and 0.610 inches -
Extended Washer Diameter
Between 1.384 inches and 1.394 inches -
Extended Washer Thickness
Between 0.098 inches and 0.118 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Head Minor Diameter
Between 0.797 inches and 0.812 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-444-8249 MPN NAS1063A2-107BUTerminal Board Marker Strip
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5305-00-007-0282 MPN NAS1100E08-12PMachine Screw
- 5305-00-008-5905 MPN NAS1189E02T5LSocket Head Cap Screw
- 5305-00-052-8242 MPN MS24617-56Tapping Screw
- 5305-00-058-9385 MPN MS51977-63Setscrew
- 5305-00-079-5834 MPN NAS514-832-14Machine Screw
- 5305-00-145-0958 MPN MS27039-4-23Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-313-9202 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21134-12030 | National Aerospace Standards |
MS21134-12030 | Military Standards |