NSN 5306-01-314-8483
Coaxial Connector
Between 7.494 inches and 7.514 inches fastener length, double hexagon w/hole head style, 0.300 inches head height, width between flats: 0.312 inches .
Manufacturer part number MS21250-04112 for national stock number 5306013148483.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-314-8483.
-
MPN or Model
MS21250-04112
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.484 inches and 0.524 inches -
Fastener Length
Between 7.494 inches and 7.514 inches -
Head Style
Double hexagon w/hole -
Head Height
0.300 inches -
Width Between Flats
0.312 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
0.069 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 6.990 inches and 7.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-082-4642 MPN MS18029-1S12Terminal Board Cover
- 5935-00-139-2516 MPN MS24266R20B41S8Electrical Plug Connector
- 5935-00-152-7887 MPN MS25042-22DElectrical Connector Cover
- 5935-00-173-5048 MPN MS27506B18-2Electrical Connector Backshell
- 5935-00-201-7510 MPN MS3102R24-20SCElectrical Receptacle Connector
- 5935-00-272-7957 MPN MS27473T16B6SAElectrical Plug Connector
- 5905-00-279-1925 MPN MS35045-194Composition Fixed Resistor
- 5935-00-394-0565 MPN MS27474T16B6PElectrical Plug Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-314-8483 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-04112 | Military Standards |