NSN 5306-01-315-7085
Wheel Bolt
Heat treated per pwa 36545-3 cagec 77445 on point and bearing surfaces of head.
Manufacturer part number 4071766 for national stock number 5306013157085.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-315-7085.
-
MPN or Model
4071766
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.392 inches and 0.510 inches -
Fastener Length
Between 0.615 inches and 0.635 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.293 inches and 0.313 inches -
Width Between Flats
0.312 inches -
Extended Washer Diameter
Between 0.428 inches and 0.448 inches -
Extended Washer Thickness
0.060 inches -
Hole Diameter
Between 0.060 inches and 0.070 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.125 inches and 0.223 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Hole Configuration Style
Double hexagon longitudinal hole -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy -
Material Specification
Pwa 96 cagec 77445 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5306-01-026-6869 MPN 4048151Tee Head Bolt
- 4920-00-007-1655 MPN PWA30538Pump Drill Jig
- 5940-01-096-0422 MPN 556080Lug Terminal
- 4920-01-263-6652 MPN PWA70256Aircraft Engine Maintenance Fixture
- 4920-01-353-1641 MPN PWA70469Aircraft Maintenance Fixture
- 4920-01-372-1271 MPN PWA70762Aircraft Engine Maintenance Fixture
- 4920-01-385-3639 MPN PWA83072Aircraft Engine Maintenance Heater
- 4920-01-385-4666 MPN PWA80525Aircraft Engine Maintenance Heater
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-315-7085 machine boltManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| 4071766 | United Technologies Corporation |
| 4071766 | United Technologies Corporation |
Stock Check
