NSN 5306-01-321-8589
Close Tolerance Hex Head Bolt
1.312 inches fastener length, double hexagon w/hole head style, 0.330 inches head height, width between flats: between 0.305 inches and 0.313 inches .
Manufacturer part number MS9111-13 for national stock number 5306013218589.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-321-8589.
-
MPN or Model
MS9111-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.624 inches -
Fastener Length
1.312 inches -
Head Style
Double hexagon w/hole -
Head Height
0.330 inches -
Width Between Flats
Between 0.305 inches and 0.313 inches -
Extended Washer Diameter
0.438 inches -
Extended Washer Thickness
Between 0.050 inches and 0.060 inches -
Grip Diameter
Between 0.2494 inches and 0.2499 inches -
Thread Diameter
0.250 inches -
Grip Length
0.688 inches -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
32.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-255-3375 MPN AS90362Electrical Receptacle Connector
- 5935-00-622-2929 MPN AS50151Electrical Plug Connector
- 5935-01-104-8438 MPN AS50151Electrical Plug Connector
- 5935-01-174-3672 MPN AS85049Electrical Connector Cable Clamp
- 5935-01-229-0140 MPN AS50151Electrical Receptacle Connector
- 5935-01-229-3058 MPN SAE AS85049/11Electrical Connector Backshell
- 5935-01-236-8669 MPN AS 5015Electrical Receptacle Connector
- 5935-01-241-3601 MPN AS50151Electrical Plug Connector
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-321-8589 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9111-13 | Society Of Automotive Engineers Inc |
MS9111-13 | Military Standards |
MS9111-13 | Sae International |
MS9111-13 | Sae International |