NSN 5306-01-323-3340
Close Tolerance Hex Head Bolt
Thread modified major dia 0.2410/0.2470 in..
Manufacturer part number 4076817 for national stock number 5306013233340.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-323-3340.
-
MPN or Model
4076817
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.525 inches -
Fastener Length
Between 0.990 inches and 1.010 inches -
Head Style
Tee no. 6 -
Head Height
Between 0.090 inches and 0.110 inches -
Head Length
Between 0.480 inches and 0.500 inches -
Width Between Flats
0.375 inches -
Grip Diameter
Between 0.2488 inches and 0.2493 inches -
End Application
F100pw0229 engine -
Thread Diameter
0.250 inches -
Grip Length
Between 0.435 inches and 0.515 inches -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
32.0 microinches grip -
Chamfer Angle
Between 44.0 degrees and 46.0 degrees -
Material
Nickel alloy -
Material Specification
Pwa 96, cage77445 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-007-1655 MPN PWA30538Pump Drill Jig
- 4920-00-045-8712 MPN PWA22442Aircraft Maintenance Fixture
- 4920-00-212-2476 MPN PWA7148Aircraft Engine Maintenance Fixture
- 4920-00-536-8721 MPN PWA52700Compressor Rotor And S Protector
- 4920-01-108-8625 MPN PWA55264Plasma Spray Mask
- 4920-01-113-7341 MPN PWA55514Transfer Drill Jig
- 4920-01-120-1770 MPN PWA55429Aircraft Component Test Plug
- 4920-01-336-8250 MPN PWA34837Aircraft Maintenance Fixture
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-323-3340 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
4076817 | United Technologies Corporation |