NSN 5306-01-325-9952
Coaxial Connector
Between 4.910 inches and 4.940 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS6704DU72 for national stock number 5306013259952.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-325-9952.
-
MPN or Model
NAS6704DU72
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 4.910 inches and 4.940 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.249 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches all holes and 0.066 inches all holes -
Thread Diameter
0.250 inches -
Grip Length
Between 4.485 inches and 4.515 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.722 inches all holes and 4.772 inches all holes -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-505-2520 MPN LS15266V3-1Machine Screw
- 5305-01-103-8822 MPN 3M926-5L13Close Tolerance Screw
- 5305-01-193-6859 MPN 1067061-3-6Close Tolerance Screw
- 5305-01-512-8416 MPN 3M1170C3-9AFClose Tolerance Screw
- 5305-01-513-1154 MPN 3M1170C6-10AClose Tolerance Screw
- 5306-01-014-5125 MPN VAL23029-5-14Close Tolerance Bolt
- 5306-01-024-2461 MPN VAL23029-5D25Close Tolerance Bolt
- 5306-01-045-2888 MPN VAL23608-3-11Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-325-9952 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6704DU72 | National Aerospace Standards |
BACB30LM4DU72 | Valley-todeco, Inc. |
BACB301LM4DU72 | Sps Technologies, Llc |
BACB30LM4DU72 | Arconic Global Fasteners & Rings, |
BACB30LM4DU72 | Sps Technologies, Llc |
BACB30LM4DU72 | Deutsch Co The |
BACB30LM4DU72 | Federal Manufacturing Corporation |
BACB30LM4DU72 | The Boeing Company |
BACB30LM4DU72 | Sps Technologies, Llc |
BACB30LM4DU72 | Alcoa Global Fasteners, Inc. |