NSN 5306-01-326-5744
Coaxial Connector
Between 0.793 inches and 0.823 inches fastener length, spline extended washer head style, between 0.195 inches and 0.215 inches head height, extended washer diameter: between 0.349 inches and 0.359 inches .
Manufacturer part number MS14181-03006 for national stock number 5306013265744.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-326-5744.
-
MPN or Model
MS14181-03006
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
095190 - Hardware, NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.408 inches -
Fastener Length
Between 0.793 inches and 0.823 inches -
Head Style
Spline extended washer -
Head Height
Between 0.195 inches and 0.215 inches -
Extended Washer Diameter
Between 0.349 inches and 0.359 inches -
Extended Washer Thickness
Between 0.017 inches and 0.037 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Head Minor Diameter
Between 0.173 inches and 0.188 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response or ams5663 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-688-5996 MPN NAS707T2Stud Terminal
- 5940-01-510-2081 MPN NAS1063A7Terminal Board Marker Strip
- 5935-01-660-8038 MPN ES930VTElectrical Receptacle Connector
- 5305-00-001-4781 MPN NAS1352-06-8PSocket Head Cap Screw
- 5305-00-005-0643 MPN NAS1153E16Close Tolerance Screw
- 5305-00-007-3026 MPN NAS1102E04-7PMachine Screw
- 5305-00-051-2332 MPN MS51958-101Machine Screw
- 5305-00-068-1654 MPN MS51031-8Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-326-5744 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS14181-03006 | National Aerospace Standards |
MS14181-03006 | Military Standards |