NSN 5306-01-327-5177
Coaxial Connector
Between 7.195 inches and 7.225 inches fastener length, double hexagon w/hole head style, between 0.913 inches and 0.933 inches head height, width between flats: between 1.052 inches and 1.064 inches .
Manufacturer part number BACB30MT16T91 for national stock number 5306013275177.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-327-5177.
-
MPN or Model
BACB30MT16T91
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.523 inches -
Fastener Length
Between 7.195 inches and 7.225 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.913 inches and 0.933 inches -
Width Between Flats
Between 1.052 inches and 1.064 inches -
Extended Washer Diameter
Between 1.615 inches and 1.625 inches -
Extended Washer Thickness
Between 0.212 inches and 0.232 inches -
Grip Diameter
Between 0.9980 inches and 0.9990 inches -
Thread Diameter
1.000 inches -
Grip Length
Between 5.677 inches and 5.697 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Nickel and cadmium and chromate -
Surface Treatment Specification
Ams2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-131-2206 MPN ST3M455-7L19Close Tolerance Screw
- 5305-01-160-7561 MPN ST3M557-5-18Close Tolerance Screw
- 5305-01-186-1231 MPN LD111-0044-2307Close Tolerance Screw
- 5305-01-226-9063 MPN BACB30LU5-12XShoulder Screw
- 5306-00-113-8314 MPN 43390-1Shoulder Bolt
- 5306-00-205-3521 MPN VFK100G-05052Shear Bolt
- 5306-00-960-5454 MPN BACB30LM3DU-8Shear Bolt
- 5306-01-025-6434 MPN VAL23029-4-18Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-327-5177 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30MT16T91 | The Boeing Company |
BACB30MT16T91 | Huck International, Inc. |
BACB30MT16T91 | Sps Technologies, Llc |
BACB30MT16T91 | Valley-todeco, Inc. |
BACB30MT16T91 | Sps Technologies, Llc |
BACB30MT16T91 | Deutsch Co The |
BACB30MT16T91 | Federal Manufacturing Corporation |
BACB30MT16T91 | Sps Technologies, Llc |
BACB30MT16T91 | Alcoa Global Fasteners, Inc. |
BACB30MT16T91 | Huck Intl Inc |