NSN 5306-01-330-0446
Coaxial Connector
Between 3.423 inches and 3.453 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS2815C48D for national stock number 5306013300446.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-330-0446.
-
MPN or Model
NAS2815C48D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.428 inches and 0.448 inches -
Fastener Length
Between 3.423 inches and 3.453 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.313 inches -
Grip Length
Between 2.990 inches and 3.010 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
17100 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.990 inches first hole and 3.010 inches first hole -
Material
Stainless steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas2815 professional/industrial association standard
More from these suppliers
- 5940-00-833-5836 MPN NAS1063A2-708Terminal Board Marker Strip
- 5940-01-425-6509 MPN NAS1063A5-442Terminal Board Marker Strip
- 5940-01-432-4403 MPN NAS1063A16-507DTerminal Board Marker Strip
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-001-9750 MPN NAS1351-4-14PSocket Head Cap Screw
- 5305-00-008-7856 MPN NAS1742C04-6USocket Head Cap Screw
- 5305-00-058-4011 MPN MS24694S105Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-330-0446 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2815C48D | National Aerospace Standards |