NSN 5306-01-330-0456
Close Tolerance Hex Head Bolt
Between 3.437 inches and 3.484 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.553 inches and 0.565 inches .
Manufacturer part number AN176C33A for national stock number 5306013300456.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-330-0456.
-
MPN or Model
AN176C33A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Fastener Length
Between 3.437 inches and 3.484 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.553 inches and 0.565 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 2.796 inches and 2.828 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-196-4639 MPN AN3102A24-22PElectrical Receptacle Connector
- 5935-00-230-1561 MPN AN3102A14S5SElectrical Receptacle Connector
- 4820-00-529-3197 MPN AN6014-1Check Valve
- 5935-00-222-7838 MPN AN3106B40-1PElectrical Plug Connector
- 5305-00-144-3815 MPN AN520-10R4Machine Screw
- 5305-00-271-7634 MPN AN505-8-15Machine Screw
- 5305-00-282-8503 MPN AN507C632R20Machine Screw
- 5305-00-378-2656 MPN AN565A428H10Setscrew
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-330-0456 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN176C33A | Aeronautical Standards Group |