NSN 5306-01-330-9757
Coaxial Connector
Between 5.817 inches and 5.864 inches fastener length, double hexagon head style, between 0.247 inches and 0.267 inches head height, width between flats: between 0.678 inches and 0.689 inches .
Manufacturer part number AIC558-7-84 for national stock number 5306013309757.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-330-9757.
-
MPN or Model
AIC558-7-84
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.583 inches -
Fastener Length
Between 5.817 inches and 5.864 inches -
Head Style
Double hexagon -
Head Height
Between 0.247 inches and 0.267 inches -
Width Between Flats
Between 0.678 inches and 0.689 inches -
Grip Diameter
Between 0.4521 inches and 0.4526 inches -
Thread Diameter
0.437 inches -
Grip Length
5.250 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-5076 MPN LS15267V3-28Machine Screw
- 5305-01-030-1766 MPN BACB30LU3D14Close Tolerance Screw
- 5305-01-365-0408 MPN BACB30LR6-38Close Tolerance Screw
- 5306-00-205-3700 MPN BACB30MF6-18Close Tolerance Bolt
- 5306-00-514-7739 MPN VEP220555-5-17Machine Bolt
- 5306-00-523-2860 MPN J643P10AMachine Bolt
- 5306-01-045-4195 MPN VAL23608-4-16Shoulder Bolt
- 5306-01-045-6553 MPN VAL23608-3-29Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-330-9757 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC558-7-84 | Sps Technologies, Llc |
H408F7-84 | Huck International, Inc. |
VS3244F-7-84 | Alcoa Global Fasteners, Inc. |
VCD0020-7-84 | Valley-todeco, Inc. |
PBF1479-7-84A | Sps Technologies, Llc |
GB511GG7-84A | Northrop Grumman Systems Corporation |
GB511GG7-84A | Sps Technologies, Llc |