NSN 5306-01-330-9785
Close Tolerance Hex Head Bolt
Between 1.340 inches and 1.370 inches fastener length, double hexagon w/hole head style, between 0.338 inches and 0.358 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number VCC0090-5-14 for national stock number 5306013309785.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-330-9785.
-
MPN or Model
VCC0090-5-14
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.480 inches -
Fastener Length
Between 1.340 inches and 1.370 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.338 inches and 0.358 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
Between 0.521 inches and 0.531 inches -
Extended Washer Thickness
0.082 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-507-2176 MPN LS15265V4-12Close Tolerance Screw
- 5305-01-106-3860 MPN 3M926-5L10Close Tolerance Screw
- 5305-01-338-3144 MPN BACB30NT3R12Close Tolerance Screw
- 5305-01-431-9981 MPN VCL0009-3-4Close Tolerance Screw
- 5305-01-511-6974 MPN 3M1170D3-14AClose Tolerance Screw
- 5306-00-285-9933 MPN VAL23033-4-16Shear Bolt
- 5306-01-131-8164 MPN BACB30LJHU15Shear Bolt
- 5306-01-165-2455 MPN LD111-0026-0517Close Tolerance Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-330-9785 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCC0090-5-14 | Valley-todeco, Inc. |
PBF1478-5-14 | Sps Technologies, Llc |
84725-5-14 | Sps Technologies, Llc |
GB511GF5-14 | Northrop Grumman Systems Corporation |