NSN 5306-01-331-5364
Coaxial Connector
0.302 inches fastener length, spline extended washer head style, 0.194 inches head height, extended washer diameter: 0.460 inches .
Manufacturer part number NASM2127H04005 for national stock number 5306013315364.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-331-5364.
-
MPN or Model
NASM2127H04005
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.485 inches -
Fastener Length
0.302 inches -
Head Style
Spline extended washer -
Head Height
0.194 inches -
Extended Washer Diameter
0.460 inches -
Extended Washer Thickness
0.026 inches -
Grip Diameter
0.248 inches -
Head Minor Diameter
0.318 inches -
Thread Diameter
0.250 inches -
Grip Length
0.312 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-549-8877 MPN NAS45-6-14CTerminal Board
- 5940-01-527-5276 MPN NAS1388-4Conductor Splice
- 5940-01-361-8073 MPN NAS1746-6Conductor Splice
- 5305-00-008-5914 MPN NAS1100C06-28Machine Screw
- 5305-00-052-6878 MPN MS24627-54Tapping Screw
- 5305-00-057-0518 MPN MS51958-21Machine Screw
- 5305-00-059-3660 MPN NASM51958Machine Screw
- 5305-00-066-8535 MPN MS27039-4-21Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-331-5364 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM2127H04005 | National Aerospace Standards |
MS21297H04005 | Military Standards |
MS21297H04005 | National Aerospace Standards |