NSN 5306-01-332-3173
Close Tolerance Hex Head Bolt
1.355 inches fastener length, double hexagon head style, 0.164 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number VAL23611-4DS017 for national stock number 5306013323173.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-332-3173.
-
MPN or Model
VAL23611-4DS017
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.293 inches -
Fastener Length
1.355 inches -
Head Style
Double hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
1.062 inches -
Features Provided
Cetyl alcohol lubricant -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.230 inches first hole -
Material
Steel comp h11 -
Surface Treatment
Chromate and nickel and cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-539-5342 MPN ST3M454-4L12Close Tolerance Screw
- 5305-01-015-6646 MPN ST3M454-3L-3Close Tolerance Screw
- 5305-01-110-9772 MPN 3M925C5-105Close Tolerance Screw
- 5305-01-477-5610 MPN 3M1034C6-17-49Close Tolerance Screw
- 5306-00-332-4561 MPN ST3M571-12-32Close Tolerance Bolt
- 5306-00-403-1520 MPN MS21250-05004Shear Bolt
- 5306-00-434-4643 MPN GB511H-4-17Shear Bolt
- 5306-00-526-3994 MPN J644P13BMachine Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-332-3173 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VAL23611-4DS017 | Valley-todeco, Inc. |
AIC2263A04D017 | Sps Technologies, Llc |
PBF1041A4D017 | Sps Technologies, Llc |
STSBG000A04D017 | Lockheed Martin Corporation |
VS2978A04D017 | Arconic Global Fasteners & Rings, |
BM3200-4A017D | Huck International, Inc. |
STSBG000A04D017 | Sps Technologies, Llc |
11797A04D017 | Reid Products Inc. |
STSBG000A04D017 | Reid Products Inc. |
STSBG000A04D017 | Alcoa Global Fasteners, Inc. |
BM3200-4A017D | Huck Intl Inc |
68484-4-017 | Bogen Photo Corp |
VS2978A04D017 | Alcoa Global Fasteners, Inc. |