NSN 5306-01-332-3206
Close Tolerance Hex Head Bolt
3.016 inches fastener length, double hexagon head style, 0.281 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number VAL23611-8DS040 for national stock number 5306013323206.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-332-3206.
-
MPN or Model
VAL23611-8DS040
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.516 inches -
Fastener Length
3.016 inches -
Head Style
Double hexagon -
Head Height
0.281 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
2.500 inches -
Features Provided
Cetyl alcohol lubricant -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.875 inches first hole -
Material
Steel comp h11 -
Surface Treatment
Chromate and nickel and cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-501-4903 MPN 3M943C4G3-4Headle Shoulder Pin
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-01-054-4635 MPN BACB30LU4-13Close Tolerance Screw
- 5305-01-056-5452 MPN BACB30LU5-4Close Tolerance Screw
- 5305-01-398-6338 MPN 03A098-12D37PClose Tolerance Screw
- 5305-01-435-5961 MPN BACB30LU7-53Close Tolerance Screw
- 5305-01-512-8385 MPN TX1024C4-2-5AClose Tolerance Screw
- 5306-00-881-0672 MPN VFK100G-05050Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-332-3206 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VAL23611-8DS040 | Valley-todeco, Inc. |
AIC2263A08D040 | Sps Technologies, Llc |
PBF1041A8D040 | Sps Technologies, Llc |
68484-8-40 | Sps Technologies, Llc |
STSBG000A08D040 | Lockheed Martin Corporation |
VS2978A08D040 | Arconic Global Fasteners & Rings, |
BM3200-8A040D | Huck International, Inc. |
11797A08D040 | Reid Products Inc. |
STSBG000A08D040 | Sps Technologies, Llc |
STSBG000A08D040 | Alcoa Global Fasteners, Inc. |
BM3200-8A040D | Huck Intl Inc |
VS2978A08D040 | Alcoa Global Fasteners, Inc. |