NSN 5306-01-332-3214
Close Tolerance Hex Head Bolt
2.828 inches fastener length, double hexagon head style, 0.281 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number BM3200-8A037 for national stock number 5306013323214.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-332-3214.
-
MPN or Model
BM3200-8A037
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.516 inches -
Fastener Length
2.828 inches -
Head Style
Double hexagon -
Head Height
0.281 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
2.312 inches -
Features Provided
Cetyl alcohol lubricant -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Material
Steel comp h11 -
Surface Treatment
Chromate and nickel and cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2935 MPN LS15264V3-5Machine Screw
- 5305-01-350-4547 MPN GB510FJ4-10Close Tolerance Screw
- 5305-01-435-5371 MPN BACB30LU8-20Close Tolerance Screw
- 5305-01-512-8411 MPN 3M1170C3-5AFClose Tolerance Screw
- 5305-01-513-9637 MPN ST3M557-4-5Close Tolerance Screw
- 5305-01-600-3726 MPN 3M1277E4D17AMachine Screw
- 5305-01-604-8543 MPN 3M1277E4D6ALMachine Screw
- 5306-00-205-3521 MPN MS21250-05052Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-332-3214 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM3200-8A037 | Huck International, Inc. |
VS2978A08U037 | Arconic Global Fasteners & Rings, |
STSBG000A08U037 | Lockheed Martin Corporation |
STSBG000A08U037 | Sps Technologies, Llc |
STSBG000A08U037 | Valley-todeco, Inc. |
STSBG000A08U037 | Sps Technologies, Llc |
11797A08U037 | Reid Products Inc. |
STSBG000A08U037 | Alcoa Global Fasteners, Inc. |
BM3200-8A037 | Huck Intl Inc |
VAL23611-8D037 | Valley-todeco, Inc. |
AIC2263A08U037 | Sps Technologies, Llc |
PBF1041A8U037 | Sps Technologies, Llc |
68484-8A037 | Sps Technologies, Llc |
VS2978A08U037 | Alcoa Global Fasteners, Inc. |