NSN 5306-01-332-6484
Coaxial Connector
Between 6.731 inches and 6.751 inches fastener length, double hexagon extended washer head style, 0.435 inches head height, width between flats: 0.500 inches .
Manufacturer part number MS21250-07-096 for national stock number 5306013326484.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-332-6484.
-
MPN or Model
MS21250-07-096
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.621 inches and 0.761 inches -
Fastener Length
Between 6.731 inches and 6.751 inches -
Head Style
Double hexagon extended washer -
Head Height
0.435 inches -
Width Between Flats
0.500 inches -
Extended Washer Diameter
Between 0.740 inches and 0.750 inches -
Extended Washer Thickness
0.099 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 5.990 inches and 6.010 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-045-8693 MPN NAS709T1Stud Terminal
- 5940-00-228-4291 MPN NAS1744-4Conductor Splice
- 1680-00-525-4457 MPN NAS25-4KLTrunnion Tank Strap
- 5940-00-718-1721 MPN NAS707C3Stud Terminal
- 5940-01-372-2501 MPN NAS1063B-21-40Terminal Board Marker Strip
- 5305-00-008-9115 MPN NAS1190E02T7LSocket Head Cap Screw
- 5305-00-054-9247 MPN MS24694C108Machine Screw
- 5305-00-059-3657 MPN NASM51958Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-332-6484 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-07-096 | National Aerospace Standards |
MS21250-07-096 | Military Standards |