NSN 5306-01-332-7107
Coaxial Connector
Between 3.524 inches and 3.554 inches fastener length, spline extended washer head style, 0.700 inches head height, extended washer diameter: between 1.615 inches and 1.625 inches .
Manufacturer part number 80994-14-34 for national stock number 5306013327107.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-332-7107.
-
MPN or Model
80994-14-34
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.414 inches -
Fastener Length
Between 3.524 inches and 3.554 inches -
Head Style
Spline extended washer -
Head Height
0.700 inches -
Extended Washer Diameter
Between 1.615 inches and 1.625 inches -
Extended Washer Thickness
Between 0.116 inches and 0.136 inches -
Grip Diameter
Between 0.873 inches and 0.874 inches -
Head Minor Diameter
Between 0.923 inches and 0.938 inches -
Thread Diameter
0.875 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-508-5041 MPN LS15267V3-32Machine Screw
- 5305-01-502-4793 MPN 3M1169C3-8AClose Tolerance Screw
- 5306-00-332-4479 MPN ST3M571-4-26Close Tolerance Bolt
- 5306-00-935-7528 MPN MS21250-05028Shear Bolt
- 5306-01-021-6838 MPN VAL23033-4H6Shear Bolt
- 5306-01-360-1763 MPN VCG0016-6-45Shear Bolt
- 5306-01-381-0891 MPN VCG0030-5-19Close Tolerance Bolt
- 5306-01-466-1211 MPN GB511GG6-13AShear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-332-7107 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
80994-14-34 | Sps Technologies, Llc |
VCG0027-14-34 | Valley-todeco, Inc. |
AIC871-14-34 | Sps Technologies, Llc |
PBF1535-14-34 | Sps Technologies, Llc |
3408-14-34 | Alcoa Global Fasteners, Inc. |
3D0013-14-34 | Boeing Company, The |