NSN 5306-01-332-7193
Externally Relieved Body Bolt
Between 0.502 inches and 0.522 inches fastener length, hexagon extended washer head style, 0.100 inches head height, width between flats: between 0.181 inches and 0.188 inches .
Manufacturer part number 7170618-00 for national stock number 5306013327193.
Datasheet
-
Product description
Externally Relieved Body Bolt NSN 5306-01-332-7193.
-
MPN or Model
7170618-00
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.171 inches -
Fastener Length
Between 0.502 inches and 0.522 inches -
Head Style
Hexagon extended washer -
Head Height
0.100 inches -
Width Between Flats
Between 0.181 inches and 0.188 inches -
Extended Washer Diameter
Between 0.335 inches and 0.345 inches -
Extended Washer Thickness
0.020 inches -
First Diameter From Head
Between 0.119 inches and 0.124 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.341 inches -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-170-6748 MPN 7904132-03Switch Subassembly
- 5905-00-458-6754 MPN 7902753-10Film Fixed Resistor
- 5930-00-762-8810 MPN 7903728-00Toggle Switch
- 5950-00-870-4089 MPN 908197-02Reactor-transformer
- 5930-00-919-7654 MPN 7902817-06Toggle Switch
- 5945-01-012-4215 MPN 7904232-01Electromagnetic Relay
- 5905-01-053-5789 MPN 7906449-50Film Fixed Resistor
- 5905-01-081-9954 MPN 20000481-6Wire Wound Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
Pricing and Availability
Get a quote for 5306-01-332-7193 externally relieved body boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7170618-00 | Lockheed Martin Corporation |