NSN 5306-01-332-7196
Coaxial Connector
Between 4.921 inches and 4.941 inches fastener length, double hexagon w/hole head style, 0.711 inches head height, width between flats: 0.812 inches .
Manufacturer part number MS21250-12062 for national stock number 5306013327196.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-332-7196.
-
MPN or Model
MS21250-12062
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.056 inches -
Fastener Length
Between 4.921 inches and 4.941 inches -
Head Style
Double hexagon w/hole -
Head Height
0.711 inches -
Width Between Flats
0.812 inches -
Extended Washer Diameter
Between 1.220 inches and 1.230 inches -
Extended Washer Thickness
0.178 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 3.865 inches and 3.885 inches -
Thready Qty Per Inch (tpi)
162 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-006-1265 MPN MS3470L14-5SXElectrical Receptacle Connector
- 5950-00-035-4425 MPN MS75085-07Radio Frequency Coil
- 5950-00-096-2552 MPN MS27288-1Power Transformer
- 5935-00-163-3640 MPN MS27473T18A11SElectrical Plug Connector
- 5935-00-165-2502 MPN MS27473E18B35PAElectrical Plug Connector
- 5935-00-201-7865 MPN MS3107A14S-7PElectrical Plug Connector
- 5935-00-201-7961 MPN MS3100E20-4PElectrical Receptacle Connector
- 5935-00-201-9524 MPN MS3102R12-5PYElectrical Receptacle Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-332-7196 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-12062 | Military Standards |