NSN 5306-01-332-7201
Coaxial Connector
Chamfer on thread end at 60 deg angle.
Manufacturer part number MS21250-09012 for national stock number 5306013327201.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-332-7201.
-
MPN or Model
MS21250-09012
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.852 inches and 0.892 inches -
Fastener Length
Between 1.612 inches and 1.632 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.547 inches and 0.567 inches -
Width Between Flats
Between 0.615 inches and 0.635 inches -
Extended Washer Diameter
Between 0.928 inches and 0.938 inches -
Extended Washer Thickness
Between 0.123 inches and 0.143 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-009-3082 MPN MS27501B99CElectrical Connector Cover
- 5975-00-074-2072 MPN MS17822-9-1Electrical Components Tiedown Strap
- 5935-00-105-5493 MPN MS3137E12-50SElectrical Plug Connector
- 5935-00-118-7878 MPN MS3113H8C4PWElectrical Receptacle Connector
- 5935-00-173-4184 MPN MS17347R24C28SWElectrical Receptacle Connector
- 5935-00-198-4007 MPN MS3187A16Electrical Connector End Seal Plug
- 5935-00-201-3263 MPN MS3102E24-21PElectrical Receptacle Connector
- 5935-00-259-2740 MPN MS3100A12S3SElectrical Receptacle Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-332-7201 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-09012 | Military Standards |