NSN 5306-01-333-4661
Close Tolerance Hex Head Bolt
Between 0.760 inches and 0.780 inches fastener length, double hexagon extended washer head style, between 0.293 inches and 0.313 inches head height, width between flats: 0.312 inches .
Manufacturer part number J414P002A for national stock number 5306013334661.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-333-4661.
-
MPN or Model
J414P002A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.630 inches and 0.660 inches -
Fastener Length
Between 0.760 inches and 0.780 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.293 inches and 0.313 inches -
Width Between Flats
0.312 inches -
Extended Washer Diameter
Between 0.428 inches and 0.448 inches -
Extended Washer Thickness
Between 0.055 inches and 0.075 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.120 inches and 0.130 inches -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-450-1844 MPN 21C1592-13Screen And Thermoco
- 4920-00-548-7651 MPN 8922768G01Aircraft Engine Maintenance Fixture
- 4920-00-723-7663 MPN 21C466Blades Protector
- 4920-00-872-3945 MPN 21C4005P010Oil Tube Guide
- 5905-00-957-4805 MPN R984P1001BInductive Wire Wound Fixed Resistor
- 5905-00-958-0934 MPN R984P0480AInductive Wire Wound Fixed Resistor
- 4920-00-970-4928 MPN 1C2903G2Test Stand-nozzle A
- 5905-01-016-9142 MPN R984P0800BInductive Wire Wound Fixed Resistor
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-333-4661 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J414P002A | General Electric Company |