NSN 5306-01-334-1304
Coaxial Connector
3.616 inches fastener length, double hexagon extended washer head style, 0.435 inches head height, width between flats: 0.500 inches .
Manufacturer part number MS21250-07046 for national stock number 5306013341304.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-334-1304.
-
MPN or Model
MS21250-07046
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.741 inches -
Fastener Length
3.616 inches -
Head Style
Double hexagon extended washer -
Head Height
0.435 inches -
Width Between Flats
0.500 inches -
Extended Washer Diameter
Between 0.740 inches and 0.750 inches -
Extended Washer Thickness
0.099 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 2.865 inches and 2.885 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-028-7995 MPN MS27212-1-9Terminal Board
- 5940-00-050-2308 MPN MS0035431-3Lug Terminal
- 5935-00-089-2993 MPN MS3126F24-61SYElectrical Plug Connector
- 5935-00-126-1756 MPN MS3111P8-3SElectrical Plug Connector
- 5905-00-146-8157 MPN MS90537-38Film Fixed Resistor
- 4820-00-174-0339 MPN MS35782-3Drain Cock
- 5935-00-211-1013 MPN MS27484T20B35SCElectrical Plug Connector
- 5935-00-238-0734 MPN MS17346R22C22SElectrical Receptacle Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-334-1304 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-07046 | Military Standards |