NSN 5306-01-334-6318
Close Tolerance Hex Head Bolt
Hole drilled in top center of head,0.470/0.510 in. Dia x 0.180 in. Nomdeep.
Manufacturer part number MS21297H10014 for national stock number 5306013346318.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-334-6318.
-
MPN or Model
MS21297H10014
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.012 inches -
Fastener Length
Between 1.880 inches and 1.910 inches -
Head Style
Spline extended washer -
Head Height
Between 0.552 inches and 0.572 inches -
Extended Washer Diameter
1.158 inches -
Extended Washer Thickness
Between 0.080 inches and 0.100 inches -
Hole Diameter
Between 0.050 inches and 0.060 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Head Minor Diameter
Between 0.673 inches and 0.688 inches -
End Application
Pacer dawn -
Thread Diameter
0.6250 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
18 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Hole Configuration Style
Spline -
Surface Finish
32.0 microinches grip -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837, type ii, class 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-018-0538 MPN MS3114P24-61SZElectrical Receptacle Connector
- 5935-00-064-3226 MPN MS24264G12B3P6Electrical Receptacle Connector
- 5975-00-074-2072 MPN MS1782-1Electrical Components Tiedown Strap
- 5935-00-159-0170 MPN MS27511A22AElectrical Connector Cover
- 5935-00-173-4985 MPN MS18160-2VElectrical Receptacle Connector
- 5905-00-195-6449 MPN MS35045-17Composition Fixed Resistor
- 5935-00-195-9134 MPN MS3108A14S2SElectrical Plug Connector
- 5905-00-198-4579 MPN MS35045-24Composition Fixed Resistor
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-334-6318 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297H10014 | Military Standards |