NSN 5306-01-334-6321
Close Tolerance Hex Head Bolt
Between 3.439 inches and 3.469 inches fastener length, dished hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: 0.559 inches .
Manufacturer part number NAS6206-48D for national stock number 5306013346321.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-334-6321.
-
MPN or Model
NAS6206-48D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
Between 3.439 inches and 3.469 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
0.559 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
End Application
Pacer dawn -
Thread Diameter
0.3750 inches -
Grip Length
Between 2.090 inches and 3.010 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.271 inches first hole -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-408-4280 MPN NAS1063A2-TB107CETerminal Board Marker Strip
- 5940-01-451-4892 MPN NAS1063A20-500AZTerminal Board Marker Strip
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-032-3955 MPN NAS1153-38Close Tolerance Screw
- 5305-00-044-4153 MPN MS90725-109Hexagon Head Cap Screw
- 5305-00-052-8902 MPN MS24630-56Tapping Screw
- 5305-00-055-2036 MPN MS24694C346Machine Screw
- 5305-00-068-7045 MPN MS24694A6Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-334-6321 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6206-48D | National Aerospace Standards |