NSN 5306-01-334-7892
Coaxial Connector
Between 0.980 inches and 1.010 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6304LU10 for national stock number 5306013347892.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-334-7892.
-
MPN or Model
NAS6304LU10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.345 inches and 0.395 inches -
Fastener Length
Between 0.980 inches and 1.010 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Locking Feature
Patch threads or pellet threads or strip threads -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Plastic polyamide locking feature -
Material Specification
Ams 5731 assn standard single material response fastener or ams 5737 assn standard single material response fastener -
Thread Series Designator
Unjf -
Specification Data
80205-nas6304 professional/industrial association standard
More from these suppliers
- 1680-01-524-1333 MPN NAS1375A04SB07Aircr Air Duct Hose
- 5305-00-067-3863 MPN NAS1189-3P7NSocket Head Cap Screw
- 5305-00-252-5070 MPN MS35307-346Hexagon Head Cap Screw
- 5305-00-269-4347 MPN NAS1351C08-12Socket Head Cap Screw
- 5305-00-340-4710 MPN NAS1102E08-10Machine Screw
- 5305-00-499-4959 MPN NASM16995-16BSocket Head Cap Screw
- 5305-00-558-3386 MPN NAS334CP7Close Tolerance Screw
- 5305-00-567-6130 MPN NAS1218-08E3Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-334-7892 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6304LU10 | National Aerospace Standards |