NSN 5306-01-334-7898
Close Tolerance Hex Head Bolt
Between 0.730 inches and 0.760 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: 0.434 inches .
Manufacturer part number NAS6204-6DH for national stock number 5306013347898.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-334-7898.
-
MPN or Model
NAS6204-6DH
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 0.730 inches and 0.760 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
0.434 inches -
Hole Diameter
Between 0.046 inches and 0.056 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
End Application
Pacer dawn -
Thread Diameter
0.2500 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Hole Configuration Style
Hexagon corners -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.575 inches first hole -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 1680-01-662-0933 MPN MS24665-358Cotter Pin A469 Nrp
- 5305-00-021-4124 MPN MS35308-370Hexagon Head Cap Screw
- 5305-00-059-2500 MPN MS51976-65Setscrew
- 5305-00-068-5406 MPN MS16996-15Socket Head Cap Screw
- 5305-00-079-5832 MPN NAS514-632-6Machine Screw
- 5305-00-088-0361 MPN NAS623-2-38Machine Screw
- 5305-00-111-0720 MPN NAS1102-3-32Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-334-7898 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6204-6DH | National Aerospace Standards |