NSN 5306-01-334-7900
Close Tolerance Hex Head Bolt
Between 1.667 inches and 1.697 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: 0.434 inches .
Manufacturer part number NAS6204P21 for national stock number 5306013347900.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-334-7900.
-
MPN or Model
NAS6204P21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 1.667 inches and 1.697 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
0.434 inches -
Locking Feature
Patch threads -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
End Application
Pacer dawn -
Thread Diameter
0.2500 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Material Specification
Mil-f-18240 military specification single material response locking feature -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-207-0227 MPN NAS1745-20Conductor Splice
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-055-2797 MPN MS24673-9Socket Head Cap Screw
- 5305-00-071-2502 MPN MS24694A116Machine Screw
- 5305-00-074-4517 MPN NAS1156-9Close Tolerance Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-144-0538 MPN MS21090-349Socket Head Cap Screw
- 5305-00-245-4592 MPN NAS623-2-66Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-334-7900 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6204P21 | National Aerospace Standards |