NSN 5306-01-334-7901
Close Tolerance Hex Head Bolt
Between 1.235 inches and 1.265 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: 0.497 inches .
Manufacturer part number NAS6205-13H for national stock number 5306013347901.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-334-7901.
-
MPN or Model
NAS6205-13H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.235 inches and 1.265 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
0.497 inches -
Hole Diameter
Between 0.070 inches and 0.080 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
End Application
Pacer dawn -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Hole Configuration Style
Hexagon corners -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-303-7067 MPN NAS1747-11Conductor Splice
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5305-00-021-3801 MPN MS35307-411Hexagon Head Cap Screw
- 5305-00-057-0482 MPN MS24694C96Machine Screw
- 5305-00-058-9385 MPN MS51977-63Setscrew
- 5305-00-079-7962 MPN MS24694S210Machine Screw
- 5305-00-093-6685 MPN MS21125B415Close Tolerance Screw
- 5305-00-144-3838 MPN MILS7839Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-334-7901 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6205-13H | National Aerospace Standards |
Stock Check
- NE: 2316
- NS: 15
- SV: 1