NSN 5306-01-335-4879
Coaxial Connector
4.020 inches fastener length, double hexagon extended washer head style, 0.388 inches head height, width between flats: 0.438 inches .
Manufacturer part number MS21250-06054 for national stock number 5306013354879.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-335-4879.
-
MPN or Model
MS21250-06054
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.645 inches -
Fastener Length
4.020 inches -
Head Style
Double hexagon extended washer -
Head Height
0.388 inches -
Width Between Flats
0.438 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
0.091 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 3.365 inches and 3.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-6183 MPN NAS1100C04-13PMachine Screw
- 5305-00-008-5886 MPN NAS1102C06-8PMachine Screw
- 5305-00-047-3137 MPN NAS1351-04H8Socket Head Cap Screw
- 5305-00-069-5572 MPN NASM90725-84Hexagon Head Cap Screw
- 5305-00-082-1988 MPN NAS1351C5-36Socket Head Cap Screw
- 5305-00-225-9099 MPN MS90726-44Hexagon Head Cap Screw
- 5305-00-225-9102 MPN MS90726-47Hexagon Head Cap Screw
- 5305-00-299-7677 MPN MS24694A126Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-335-4879 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-06054 | National Aerospace Standards |
MS21250-06054 | Military Standards |