NSN 5306-01-335-5361
Coaxial Connector
0.808 inches fastener length, flat countersunk head style, 0.338 inches head diameter, grip diameter: 0.1890 inches .
Manufacturer part number NAS4603DV8 for national stock number 5306013355361.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-335-5361.
-
MPN or Model
NAS4603DV8
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
0.808 inches -
Head Style
Flat countersunk -
Head Diameter
0.338 inches -
Grip Diameter
0.1890 inches -
Thread Diameter
0.190 inches -
Grip Length
0.490 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
99.0 degrees -
Material
Titanium alloy -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-525-4457 MPN NAS25-4KLTrunnion Tank Strap
- 5305-00-008-5892 MPN NAS1102E08-30Machine Screw
- 5305-00-008-9100 MPN NAS1191E04P20LSocket Head Cap Screw
- 5305-00-057-9592 MPN MS35199-23Machine Screw
- 5305-00-068-0542 MPN NASM24678-7CSocket Head Cap Screw
- 5305-00-086-6993 MPN MS27039-5-14Machine Screw
- 5305-00-150-3319 MPN NAS1135C6Close Tolerance Screw
- 5305-00-206-2463 MPN NAS335-16-5Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-335-5361 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS4603DV8 | National Aerospace Standards |