NSN 5306-01-336-8984
Wheel Bolt
Between 0.344 inches and 0.406 inches fastener length, dished hexagon head style, between 0.150 inches and 0.163 inches head height, width between flats: between 0.425 inches and 0.437 inches .
Manufacturer part number MS16208-2 for national stock number 5306013368984.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-336-8984.
-
MPN or Model
MS16208-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1.5 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.275 inches -
Fastener Length
Between 0.344 inches and 0.406 inches -
Head Style
Dished hexagon -
Head Height
Between 0.150 inches and 0.163 inches -
Width Between Flats
Between 0.425 inches and 0.437 inches -
Thread Diameter
0.250 inches -
Features Provided
Casehardened and unfinished head -
Thready Qty Per Inch (tpi)
20 -
Material
Steel comp 303 or steel comp 303se or steel comp 304 or steel comp 305 or steel comp 316 or steel comp 321 or steel comp 347 or steel comp 384 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-013-9823 MPN MS24660-22GToggle Switch
- 5940-00-034-6942 MPN MS18029-6S8Terminal Board Cover
- 5950-00-058-3392 MPN MS75008-36Radio Frequency Coil
- 5930-00-071-7632 MPN MS24658-33KToggle Switch
- 5935-00-140-0068 MPN MS27473T24A61SElectrical Plug Connector
- 5935-00-148-4483 MPN MS3106A20-18SWElectrical Plug Connector
- 5935-00-148-9359 MPN MS3108B12S-4PElectrical Plug Connector
- 5935-00-162-1550 MPN MS27506A22-2Electrical Connector Cable Clamp
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
![Mechanic Bill explains Wheel Bolt](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-336-8984 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS16208-2 | Military Standards |
Stock Check
![](/public/images/partscage_shelf3.png)
- NS: 1
- NE: 128