NSN 5306-01-337-3262
Close Tolerance Hex Head Bolt
Between 1.001 inches and 1.031 inches fastener length, spline drive shear head head style, 0.194 inches head height, grip diameter: between 0.373 inches and 0.374 inches .
Manufacturer part number AIC596-6-9 for national stock number 5306013373262.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-337-3262.
-
MPN or Model
AIC596-6-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.454 inches and 0.570 inches -
Fastener Length
Between 1.001 inches and 1.031 inches -
Head Style
Spline drive shear head -
Head Height
0.194 inches -
Grip Diameter
Between 0.373 inches and 0.374 inches -
Head Minor Diameter
0.679 inches -
End Application
Pacer dawn -
Thread Diameter
0.3750 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel comp h11 -
Material Specification
Ams-6487 (h11) assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-775-5676 MPN BACB30LU3-17Machine Screw
- 5305-01-454-0974 MPN LD111-0046-2415Machine Screw
- 5306-00-106-8865 MPN 9713M26P05Hex Head Pin Bolt
- 5306-01-043-5717 MPN VAL22034-7G26Shear Bolt
- 5306-01-046-1187 MPN VAL23608-3-27Shoulder Bolt
- 5306-01-134-0727 MPN 3M892-14H34Close Tolerance Bolt
- 5306-01-141-7876 MPN VAL23608-4D26Shoulder Bolt
- 5306-01-160-7560 MPN BACB30NE4-21Close Tolerance Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-337-3262 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC596-6-9 | Sps Technologies, Llc |
VCG0030-6-9 | Valley-todeco, Inc. |
PBF7521-6-9 | Sps Technologies, Llc |
120978-6-9 | Sps Technologies, Llc |
VS3133-6-9 | Alcoa Global Fasteners, Inc. |
H411-6-9 | Huck Intl Inc |
5306-002-6-9 | Aidc/aerospace Industrialdevelopment |
H411-6-9 | Huck International, Inc. |