NSN 5306-01-338-3989
Coaxial Connector
2.777 inches fastener length, double hexagon w/hole head style, 0.673 inches head height, width between flats: between 0.803 inches and 0.814 inches .
Manufacturer part number 70315-10-26 for national stock number 5306013383989.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-338-3989.
-
MPN or Model
70315-10-26
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.152 inches -
Fastener Length
2.777 inches -
Head Style
Double hexagon w/hole -
Head Height
0.673 inches -
Width Between Flats
Between 0.803 inches and 0.814 inches -
Extended Washer Diameter
Between 1.185 inches and 1.195 inches -
Extended Washer Thickness
0.125 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
1.625 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Material
Cobalt comp mp-35-n -
Material Specification
Ams 5844 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-047-2346 MPN NAS1124-4Close Tolerance Screw
- 5305-00-146-7177 MPN 64040V6-23Close Tolerance Screw
- 5305-00-316-8124 MPN NAS1101E04H6Machine Screw
- 5305-00-505-2822 MPN LS15267V3-21Machine Screw
- 5305-00-764-3036 MPN 54266-6-14Machine Screw
- 5305-00-807-0391 MPN NAS1102-06-10Machine Screw
- 5305-00-808-9945 MPN 51B333-6Machine Screw
- 5305-01-025-6430 MPN 94705-6C32DShoulder Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-338-3989 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
70315-10-26 | Sps Technologies, Llc |