NSN 5306-01-338-3999
Coaxial Connector
Between 0.714 inches and 0.761 inches fastener length, double hexagon head style, 0.164 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number EWSB26-4-7 for national stock number 5306013383999.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-338-3999.
-
MPN or Model
EWSB26-4-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.293 inches -
Fastener Length
Between 0.714 inches and 0.761 inches -
Head Style
Double hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837 ty1 cl2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-144-8446 MPN NAS1146-6Close Tolerance Screw
- 5305-00-310-5867 MPN 73573-93-8CSocket Head Cap Screw
- 5305-00-541-9036 MPN LS15237C3-1Close Tolerance Screw
- 5305-00-590-7165 MPN 20097L3F8Socket Head Cap Screw
- 5305-00-957-5707 MPN 3M49-7-16Machine Screw
- 5305-00-969-4753 MPN 112-0716-009Socket Head Cap Screw
- 5305-01-076-4931 MPN ST3M653C5-10AShoulder Screw
- 5305-01-106-2355 MPN HT4068-6-12Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-338-3999 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB26-4-7 | Sps Technologies, Llc |
EWSB26-4-7 | Sps Technologies, Llc |