NSN 5306-01-338-4017
Close Tolerance Hex Head Bolt
Between 0.777 inches and 0.824 inches fastener length, double hexagon head style, 0.164 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number EWSBM26-4-8 for national stock number 5306013384017.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-338-4017.
-
MPN or Model
EWSBM26-4-8
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.376 inches -
Fastener Length
Between 0.777 inches and 0.824 inches -
Head Style
Double hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Cobalt comp mp-35-n -
Material Specification
Ams 5844 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-001-6359 MPN 20097L96C4CSocket Head Cap Screw
- 5305-00-172-6301 MPN NAS1101-6-20Machine Screw
- 5305-00-310-5203 MPN NAS1191-3P12LSocket Head Cap Screw
- 5305-00-486-2577 MPN 64040H10-11Close Tolerance Screw
- 5305-00-660-1983 MPN 53196-08-6Machine Screw
- 5305-00-851-6409 MPN NAS1203-18Close Tolerance Screw
- 5305-01-028-2471 MPN HT4020-4-7AClose Tolerance Screw
- 5305-01-088-6062 MPN NAS1101E08-10PMachine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-338-4017 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSBM26-4-8 | Sps Technologies, Llc |
EWSBM26-4-8 | Ssp Construction Equipment Inc |