NSN 5306-01-338-7272
Wheel Bolt
Between 8.125 inches and 8.172 inches fastener length, hexagon head style, between 0.328 inches and 0.360 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number AN10-C80A for national stock number 5306013387272.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-338-7272.
-
MPN or Model
AN10-C80A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.921 inches and 1.000 inches -
Fastener Length
Between 8.125 inches and 8.172 inches -
Head Style
Hexagon -
Head Height
Between 0.328 inches and 0.360 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 7.172 inches and 7.204 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-280-2059 MPN AN3100C28-21PElectrical Receptacle Connector
- 5935-00-549-1398 MPN AN3102E16S1PElectrical Receptacle Connector
- 5935-00-552-7046 MPN AN3106A20-3SCElectrical Plug Connector
- 5935-00-553-3095 MPN AN3106E16S4SCElectrical Plug Connector
- 5930-00-615-6731 MPN AN3028-1Switch Guard
- 4820-01-361-6312 MPN AN6245AB4-1750PSISafety Relief Valve
- 5305-00-087-5554 MPN AN505-4-15Machine Screw
- 5305-00-145-6804 MPN AN515-416-6Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-338-7272 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN10-C80A | Aeronautical Standards Group |