NSN 5306-01-339-2680
Coaxial Connector
3.889 inches fastener length, dished hexagon head style, 0.125 inches head height, width between flats: 0.435 inches .
Manufacturer part number BACB30NF 4D56 for national stock number 5306013392680.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-339-2680.
-
MPN or Model
BACB30NF 4D56
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.389 inches -
Fastener Length
3.889 inches -
Head Style
Dished hexagon -
Head Height
0.125 inches -
Width Between Flats
0.435 inches -
Grip Diameter
0.2479 inches -
Thread Diameter
0.250 inches -
Grip Length
3.500 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp e4340 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-073-2512 MPN A02S8024-9Stub Wing Fairing
- 1560-00-096-9843 MPN 5-62511Mount Plate Assembly
- 1560-00-222-0899 MPN 66-18895-1Slide Block
- 1560-00-328-6497 MPN 6-61362Outboard Flap Scre Retainer Plug
- 1560-00-333-6777 MPN 9-61963-5Aircraft Structural Panel
- 1560-00-339-7094 MPN 6-38330-1Aircraft Structural Component Support
- 1560-00-419-6850 MPN 65-48140-4Drain Assembly
- 5950-00-496-1509 MPN 240-2715-270Radio Frequency Coil
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-339-2680 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NF 4D56 | The Boeing Company |