NSN 5306-01-339-9554
Coaxial Connector
Between 1.156 inches and 1.186 inches fastener length, spline extended washer head style, between 0.240 inches and 0.260 inches head height, extended washer diameter: between 0.460 inches and 0.470 inches .
Manufacturer part number 84393-4-11 for national stock number 5306013399554.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-339-9554.
-
MPN or Model
84393-4-11
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.484 inches -
Fastener Length
Between 1.156 inches and 1.186 inches -
Head Style
Spline extended washer -
Head Height
Between 0.240 inches and 0.260 inches -
Extended Washer Diameter
Between 0.460 inches and 0.470 inches -
Extended Washer Thickness
Between 0.026 inches and 0.046 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Head Minor Diameter
Between 0.235 inches and 0.250 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.677 inches and 0.697 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-5041 MPN LS15267V3-32Machine Screw
- 5305-01-008-4197 MPN ST3M454-4L16Close Tolerance Screw
- 5305-01-505-4004 MPN TX1024C3-7-7AClose Tolerance Screw
- 5305-01-512-8305 MPN TX1024C4-16-6AClose Tolerance Screw
- 5305-01-512-8347 MPN 3M1169V3-27AClose Tolerance Screw
- 5305-01-560-1287 MPN H4069514AClose Tolerance Screw
- 5306-00-127-7233 MPN BACB30LM12DU41Shear Bolt
- 5306-00-195-2303 MPN VFK100G-08044Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-339-9554 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
84393-4-11 | Sps Technologies, Llc |
VCG0036-4-11 | Valley-todeco, Inc. |
AIC873-4-11 | Sps Technologies, Llc |
SLB523-4-11 | Space-lok, Inc. |
PBF1536-4-11 | Sps Technologies, Llc |
3D0108-4-11 | Boeing Company, The |
873-4-11 | Sps Technologies, Llc |