NSN 5306-01-340-1091
Shouldered Rivet Ring Bolt
About this product
Between 0.190 inches and 0.192 inches eye inside diameter, 0.078 inches shoulder thickness, between 1.140 inches and 1.187 inches shank length, eye stock thickness: between 0.120 inches and 0.130 inches .
Manufacturer part number AN43B-C11 for national stock number 5306013401091.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-340-1091.
-
MPN or Model
AN43B-C11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.452 inches and 0.499 inches -
Eye Inside Diameter
Between 0.190 inches and 0.192 inches -
Shoulder Thickness
0.078 inches -
Shank Length
Between 1.140 inches and 1.187 inches -
Eye Stock Thickness
Between 0.120 inches and 0.130 inches -
Shoulder Diameter
0.500 inches -
Overall Length
1.906 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
1.625 inches -
Eye Outside Width
0.500 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-413-2993 MPN NAS1063B-31-40Terminal Board Marker Strip
- 5940-01-444-8249 MPN NAS1063A2-107BUTerminal Board Marker Strip
- 5935-01-597-0335 MPN E0762F15-05LSpec Backshell
- 5935-01-646-7802 MPN NAS6704D60Electrical Receptacle Connector
- 5305-00-051-2330 MPN NASM51958Machine Screw
- 5305-00-130-7656 MPN MS27039DD4-24Machine Screw
- 5305-00-136-7445 MPN NAS1081-08D2NSetscrew
- 5305-00-150-0804 MPN NAS1131E8Close Tolerance Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-340-1091 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN43B-C11 | National Aerospace Standards |
AN43B-C11 | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.