NSN 5306-01-342-9042
Coaxial Connector
3.095 inches fastener length, spline extended washer head style, between 0.440 inches and 0.460 inches head height, extended washer diameter: between 0.922 inches and 0.932 inches .
Manufacturer part number 80994-8-35 for national stock number 5306013429042.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-342-9042.
-
MPN or Model
80994-8-35
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.908 inches -
Fastener Length
3.095 inches -
Head Style
Spline extended washer -
Head Height
Between 0.440 inches and 0.460 inches -
Extended Washer Diameter
Between 0.922 inches and 0.932 inches -
Extended Washer Thickness
Between 0.062 inches and 0.082 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Head Minor Diameter
Between 0.547 inches and 0.562 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 2.177 inches and 2.197 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-054-2536 MPN BACB30LK3-11Close Tolerance Screw
- 5305-01-056-1513 MPN BACB30LU4-35Close Tolerance Screw
- 5305-01-349-4197 MPN VCL0009-4-5Close Tolerance Screw
- 5305-01-513-8897 MPN VCL0010-6-16Close Tolerance Screw
- 5306-00-235-2852 MPN BACB30NF3-4Close Tolerance Bolt
- 5306-00-321-9350 MPN VAL23029-7-10Close Tolerance Bolt
- 5306-00-420-6472 MPN VFK100G-06042Shear Bolt
- 5306-00-443-6815 MPN VFK100G-06070Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-342-9042 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
80994-8-35 | Sps Technologies, Llc |
VCG0027-8-35 | Valley-todeco, Inc. |
AIC871-8-35 | Sps Technologies, Llc |
PBF1535-8-35 | Sps Technologies, Llc |
3408-8-35 | Alcoa Global Fasteners, Inc. |
3D0013-8-35 | Boeing Company, The |
871-8-35 | Sps Technologies, Llc |