NSN 5306-01-344-3087
Coaxial Connector
Between 2.220 inches and 2.250 inches fastener length, double hexagon extended washer head style, between 0.590 inches and 0.610 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number EWBTM9-9-20 for national stock number 5306013443087.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-344-3087.
-
MPN or Model
EWBTM9-9-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.975 inches and 1.025 inches -
Fastener Length
Between 2.220 inches and 2.250 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.590 inches and 0.610 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Extended Washer Diameter
Between 1.045 inches and 1.055 inches -
Extended Washer Thickness
Between 0.108 inches and 0.128 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 1.255 inches and 1.275 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Nickel and cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-382-8374 MPN 106385PT4-17Close Tolerance Screw
- 5305-00-541-9067 MPN NAS1189E08P7LSocket Head Cap Screw
- 5305-01-064-6265 MPN ST3M454-5L8Close Tolerance Screw
- 5305-01-074-9045 MPN 66908H5-12Close Tolerance Screw
- 5305-01-260-9342 MPN HT4020-5-10YShoulder Screw
- 5305-01-261-1893 MPN 51B334-8XClose Tolerance Screw
- 5305-01-309-3670 MPN 68078N3F6Machine Screw
- 5305-01-329-9744 MPN 123992-14AClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-344-3087 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWBTM9-9-20 | Sps Technologies, Llc |
EWBTM9-9-20 | Teletype Corp |