NSN 5306-01-344-7456
Coaxial Connector
0.985 inches fastener length, double hexagon w/hole head style, 0.348 inches head height, width between flats: 0.368 inches .
Manufacturer part number NAS625-7 for national stock number 5306013447456.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-344-7456.
-
MPN or Model
NAS625-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.547 inches -
Fastener Length
0.985 inches -
Head Style
Double hexagon w/hole -
Head Height
0.348 inches -
Width Between Flats
0.368 inches -
Extended Washer Diameter
0.526 inches -
Extended Washer Thickness
0.082 inches -
Grip Diameter
0.311 inches -
Thread Diameter
0.312 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-382-2946 MPN NAS1063A16-3Terminal Board Marker Strip
- 5305-00-007-3019 MPN NAS1102E02-3PMachine Screw
- 5305-00-008-5846 MPN NAS1632C26Machine Screw
- 5305-00-008-9118 MPN NAS1190C04T8LSocket Head Cap Screw
- 5305-00-143-3201 MPN MS21093-343Machine Screw
- 5305-00-150-3319 MPN NAS1135C6Close Tolerance Screw
- 5305-00-186-9234 MPN NAS1352-02LL4PSocket Head Cap Screw
- 5305-00-225-8470 MPN MS24693-S138Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-344-7456 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS625-7 | National Aerospace Standards |