NSN 5306-01-347-0237
Coaxial Connector
Between 2.518 inches and 2.538 inches fastener length, dished hexagon head style, between 0.250 inches and 0.260 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS1959C27DH for national stock number 5306013470237.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-347-0237.
-
MPN or Model
NAS1959C27DH
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.815 inches and 0.865 inches -
Fastener Length
Between 2.518 inches and 2.538 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.260 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Hole Diameter
0.070 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Thread Diameter
0.562 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.716 inches first hole -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-424-2476 MPN NAS6704D27Aircraft Structural Component Support
- 5305-00-005-0417 MPN NAS603-50PMachine Screw
- 5305-00-008-5845 MPN NAS1632C7Machine Screw
- 5305-00-071-2235 MPN MS90725-16Hexagon Head Cap Screw
- 5305-00-108-9712 MPN NAS1218-6-4Machine Screw
- 5305-00-115-9526 MPN MS90725-58Hexagon Head Cap Screw
- 5305-00-205-3463 MPN NAS1351-4H10Socket Head Cap Screw
- 5305-00-225-7116 MPN NAS1172-2NClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-347-0237 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1959C27DH | National Aerospace Standards |