NSN 5306-01-347-6377
Close Tolerance Hex Head Bolt
Between 2.231 inches and 2.251 inches fastener length, hexagon head style, between 0.126 inches and 0.141 inches head height, width between flats: 0.488 inches .
Manufacturer part number ST3M735-4-29 for national stock number 5306013476377.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-347-6377.
-
MPN or Model
ST3M735-4-29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.105 inches and 0.120 inches -
Fastener Length
Between 2.231 inches and 2.251 inches -
Head Style
Hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
0.488 inches -
Hole Diameter
Between 0.046 inches and 0.056 inches -
Locking Feature
Detent ring threads -
Grip Diameter
Between 0.248 inches and 0.249 inches -
End Application
F-15 -
Thread Diameter
0.250 inches -
Grip Length
Between 1.812 inches and 1.828 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Hole Configuration Style
Hexagon corners -
Material
Steel -
Surface Treatment
Passivate ringcadmium fastener -
Surface Treatment Specification
Oo-p-35 assn standard single treatment response ringqq-p-416, type ii, class 2 assn standard single treatment response fastener -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-209-7953 MPN 11873-4-12-6Close Tolerance Screw
- 5305-01-406-3082 MPN 11907-6DL10Close Tolerance Screw
- 5306-01-013-3998 MPN 11825-4-38Close Tolerance Bolt
- 5306-01-025-6435 MPN 11825-4-13Close Tolerance Bolt
- 5306-01-332-3185 MPN 11797A06D031Close Tolerance Bolt
- 5306-01-425-1109 MPN 11831-5H63Machine Bolt
- 5306-01-569-0977 MPN 11831-5D19Machine Bolt
- 5306-01-599-4547 MPN 11861E4D23AClose Tolerance Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-347-6377 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M735-4-29 | Boeing Company, The |
121673-4-29 | Sps Technologies, Llc |
11829-4-29 | Reid Products Inc. |