NSN 5306-01-348-2662
Coaxial Connector
3.043 inches fastener length, dished hexagon head style, 0.312 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number NAS1110-42D for national stock number 5306013482662.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-348-2662.
-
MPN or Model
NAS1110-42D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.543 inches -
Fastener Length
3.043 inches -
Head Style
Dished hexagon -
Head Height
0.312 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
2.500 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-135-7077 MPN NAS1744-7Conductor Splice
- 5975-01-487-0387 MPN MS3533P-136Electrical Components Tiedown Strap
- 5940-01-623-6190 MPN NAS1063C10-210GSectional Terminal Junction Block
- 5305-00-053-8550 MPN MS24693-S251Machine Screw
- 5305-00-057-0510 MPN MS51958-13Machine Screw
- 5305-00-058-9389 MPN MS51977-74Setscrew
- 5305-00-059-3668 MPN MS51958-72Machine Screw
- 5305-00-059-3674 MPN MS51958-78Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-348-2662 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1110-42D | National Aerospace Standards |